RADIO-ENERGIE编码器 RCIN58A RC190A RCI444 RCI444ADF

RADIO-ENERGIE Encoders - RCI444 RCI444 Encoder with REO444R Tachogenerator Flange and Shaft Dimensions The RCI444 Encoder has the same flange and shaft dimensions as the the Industry Standard REO444R Analogue Tacho and is ideally suited when using the latest generation of DC Digital Drives, if you are upgrading your drive or installing a new installation the RCI444 is the encoder of choice by many engineers. Radio-Energie optical incremental encoders are designed with the same reliability as the RADIO-ENERGIE tachogenerator. They measure with the highest accuracy the angular speed and position of rotating shafts in industrial environment. Radio-Energie encoders use a differential optical and ratio metric principle to minimize temperature and photodiode aging effects. Their universal complementary push-pull output interface and their large supply voltage range make them very easy to connect to most of electronic control units. General Specification Fixation Standard REO 444R tachogenerator flange Shaft type 7 and 11mm stainless steel shaft Body Aluminium Housing diameter 115mm Pulses per turn Standard 1024, 2048 Others : from 1 to 5400, on request. Termination Radial cable, M23 and MS310 terminal box. Output signals A and B with gated Z Output waveforms A leads B for clockwise rotation from front size. Operating temperature range (encoder body) - 25° + 85° C Supply voltage 4,5 to 30V DC with reverse polarity protection Output signals Universal complementary push pull (7272) RS422 Protection IP64 at shaft inlet, IP 65 at housing (IEC 60529) Max speed 10.000rpm