AMEPA下渣检测器  
富成国际 | 产品目录 | 联系我们
  富成国际贸易有限公司,总部设在香港,在德国,美国,日本均设有分公司,拥有良好的购销渠道,欢迎来电咨询 TEL:0086-21-51085793
         
 

德国机械 美国机械 荷兰机械


国际工业装备采购中心


香港富成国际贸易公司,是专业的欧美及日韩进口工业产品提供商。在欧洲,美国,日本及韩国拥有良好的渠道与深厚的关系,代理及经营多种品牌工业产品,欢迎选购。

WEBER
SENSOREX
FORMSPRAG
SIE
TWIFLEX
HEMOMATIK
PANTRON
ELTRA
STW
AVITEQ
INDUSTRIEREGLER
HALTEC
KLEINKNECHT
PROPORTION-AIR
FANAL
ZIMMER
RIEKER
PATLITE
STOCKERYALE
DYNISCO
TOKYO RIKOSHA
HONSBERG
REED
UWT
INELTA
TRACO POWER
OILGEAR TOWLER
MOOG
POMINI
WALDRICH
WIRTH
RACINE
SELEC AG
HERKULES
LDV-SYSTEME
ASTECH
SKI-SDF
JAHNS
SIRCAL
NIEKE
SSB
GEGA
SUND&BIRSTA
RONI
AMEPA
Foto-captor
vacuubrand
huber

 

 

 

   

富成国际

AMEPA传感器、AMEPA下渣检测器、AMEPA下渣检测控制面板、AMEPA下渣检测IF-200-COM柜内面板、AMEPA下渣检测线圈;AMEPA下渣检测仪表、AMEPA插座、AMEPA插头、AMEPA插针、AMEPA底坐、AMEPA下渣监测系统

德国AMEPA公司成立于1984年,开发了下渣检测技术.不仅应用到大包水口中.还应用到转炉、电炉的出钢下渣检测.以及中间包下渣检测, 1997年为止在世界范围内已经采用或将采用下渣检测的技术。AMEPA系统被认为是目前世界上最先进的渣检系统,其传感器也是由发射线圈和接收线圈(双线圈)组成。相应地,它的系统电路也就包含有激励单元和信号处理单元两个相对独立的组成部分,因而整体结构较为复杂。AMEPA系统的特点是采用单线圈传感器,在达到相同的检测效果下极大简化了设备的电路结构,成为又一种新的连铸下渣检测系统。AMEPA传感器、AMEPA下渣检测器、AMEPA下渣检测控制面板、AMEPA下渣检测IF-200-COM柜内面板、AMEPA下渣检测线圈;AMEPA下渣检测仪表、AMEPA插座、AMEPA插头、AMEPA插针、AMEPA底坐、AMEPA下渣监测系统 型号列举:CL-、CL129/V01、CL218V01 、C-、C218/V01 、CL205/V01 、INT-、INT-S-02、PICU-、PICU-100、SC-、SC 235 13、LDPI-、LDPI-04、PKE/HT-0 、TS100-、PSS-、PSS/HT-K-、PSS/HT-T AST/HT-T、ABS-、ABS/HT-T-、AMS-、AMS/HT-T-、HAN-、HAN-10-MT-、HAN-10-FS-、HAN-10-MS-、HAN-10-FT-、TTE-、TTE/HT

In 1984, AMEPA was founded as a "spin off" of the Aachen Technical University by three staff members of the Institute of Metallurgy with the aim of creating innovative measurement technologies for the steel industry. Already by the end of 1986, AMEPA had introduced a system to the German market for the electromagnetic detection of slag as the molten steel is being poured into metallurgical vessels. This measurement system was an immediate success as it meant a significant improvement in steel purity. Only two years later, in 1988, AMEPA installed the first slag detection systems in America and Japan. Due to the size and significance of the North American market, AMEPA AMERICA INC. was founded in Cleveland, Ohio in 1994. top Today, AMEPA has 50 employees. The 250 systems installed to date in 27 countries have made AMEPA Slag Detection Systems a worldwide standard in the steel industry. A global network of distribution and service guarantees customers individualized service, both prior to and after purchasing any AMEPA systems. In close cooperation with companies in the steel industry, AMEPA has developed additional innovative measuring systems in recent years, some of which have been put to use for the first time worldwide.

ESD – Electromagnetic Slag Detection If steel of high quality has to be produced, the most important prerequisite is a slag-free pouring of steel. AMEPA is the worldwide market leader with its electromagnetic slag detection system ESD for ladles with more than 2000 vessels equipped with sensors. 1 ESD Application 2 ESD Technology 3 ESD PublicationsTSD – Thermographic Slag Detection Since 1999, a new Thermographic Slag Detection system TSD is being operated successfully at converters. Here, the different emissivity of steel and slag is being analysed in the infrared range. This system does not need any sensors at or in the converter. RSD – Residual Steel Detection The RSD system for a precise measuring of residual steel in the tundish of continuous casting machines maximizes the yield from the tundish. In case of one steel grade change to another, the system minimizes the intermixing zone in the strand. CFM – Coal Flow Measurement for PCI Pulverized Coal Injection (PCI) systems should assure small line-to-line deviations in order to maintain a ‘healthy furnace’. Reality is often different; consequently optimal injection rates are not reached. The CFM flow meters are the first step towards optimal injection rates: measure the flow, control it, increase it to the optimum. SRM – Online Surface Roughness Measurement Surface roughness of cold rolled sheets is an important parameter for the finishing process. Up to now, online roughness measurement was only possible with systems measuring in rolling direction. AMEPA developed a new optical system enabling a measurement under 45° or 90° - as stipulated by SEP 1940 and DIN EN ISO 4287/4288 - for all kinds of textures. OFM – Online Oil Film Measurement Improper oil film layer distribution or even dry stripes on a metal strip creates problems in the forming process. Therefore an online measuring system is needed for the supervision. The AMEPA OFM system is the first system enabling online oil film measurement and automatic classification of the strip. top 1 TSD Application 2 TSD Technology 3 TSD Publications1 RSD Application 2 RSD Technology 3 RSD Publications 1 CFM Application 2 CFM Technology 3 CFM System Layout 4 CFM Publications 1 SRM Application 2 SRM Technology 3 SRM Visualization 4 SRM Publications 1 OFM Application 2 OFM Technology 3 OFM Visualization 4 OFM Publications

AMEPA传感器、AMEPA下渣检测器、AMEPA下渣检测控制面板、AMEPA下渣检测IF-200-COM柜内面板、AMEPA下渣检测线圈;AMEPA下渣检测仪表、AMEPA插座、AMEPA插头、AMEPA插针、AMEPA底坐、AMEPA下渣监测系统

 
  香港及海外业务:  00852-27828783 传真:00852-30119987
中国大陆地区业务:021-51085793  传真:021-51086107   电邮:wsitl@21cn.net