HUBER泵  
富成国际 | 产品目录 | 联系我们
  富成国际贸易有限公司,总部设在香港,在德国,美国,日本均设有分公司,拥有良好的购销渠道,欢迎来电咨询 TEL:0086-21-51085793
         
 

德国机械 美国机械 荷兰机械


国际工业装备采购中心


香港富成国际贸易公司,是专业的欧美及日韩进口工业产品提供商。在欧洲,美国,日本及韩国拥有良好的渠道与深厚的关系,代理及经营多种品牌工业产品,欢迎选购。

WEBER
SENSOREX
FORMSPRAG
SIE
TWIFLEX
HEMOMATIK
PANTRON
ELTRA
STW
AVITEQ
INDUSTRIEREGLER
HALTEC
KLEINKNECHT
PROPORTION-AIR
FANAL
ZIMMER
RIEKER
PATLITE
STOCKERYALE
DYNISCO
TOKYO RIKOSHA
HONSBERG
REED
UWT
INELTA
TRACO POWER
OILGEAR TOWLER
MOOG
POMINI
WALDRICH
WIRTH
RACINE
SELEC AG
HERKULES
LDV-SYSTEME
ASTECH
SKI-SDF
JAHNS
SIRCAL
NIEKE
SSB
GEGA
SUND&BIRSTA
RONI
AMEPA
Foto-captor
vacuubrand
huber

 

 

 

   

富成国际

HUBER电机,HUBER马达,HUBER齿轮,HUBER泵

Hose pumps SP 04 Range of application: Hose pumps are suitable for delivering fluid and gaseous media, either for simple conveyance or for precise proportioning. The use of different hose materials allows for the delivery of different chemicals, abrasive materials, corrosive or sterile media. Hose pumps are used in laboratories, in analytical and medical systems, in biotechnology, in the food industry, as well as other industrial areas. Three models are available: Integrated pumps exterior pumps laboratory pumps Mode of operation: Hose pumps operate without any valves or seals. They belong to the category of positive displacement pumps. The transported media is forced through a hose, which can be quickly exchanged and is therefore very economical. While transporting the medium, the hose is pinched together by spring-loaded compression rollers. Thus, the rotating movement pushes the medium from the suction side to the discharge side of the hose. Beyond every roller, the hose opens up again and thereby creates a vacuum. This in turn causes the medium to be drawn in. The flow rate depends on the speed of the pump's rotor, the inner diameter of the hose, the elasticity of the hose, as well as the viscosity of the transported medium. The extent of the vacuum depends on the inside diameter, the wall thickness, and the elasticity of the hose. The pressure depends on the elasticity of the hose and the contact pressure of the compression rollers. The pump rotor is equipped with two compression rollers and four guide rolls. The compression rollers are located opposite to each other, thereby sealing the hose, regardless of the pump rotor's orientation. The guide rolls ensure the hose will remain in a track, which is favourable for the compression rollers. Changing the hose is very easy and does not require any tools. Just loosen the knurled nut and remove it, including the screw, by pulling up. Remove the pump housing by pulling it downward and remove the hose sideways from its guide. Insert the replacement hose by following the same sequence in reversed order.

HUBER电机,HUBER马达,HUBER齿轮,HUBER泵

 
  香港及海外业务:  00852-27828783 传真:00852-30119987
中国大陆地区业务:021-51085793  传真:021-51086107   电邮:wsitl@21cn.net